|
|
|
| 09-29-2017, 08:28 AM | #5 |
|
Alpine White M Performance
37
Rep 252
Posts |
[IMG][/IMG] Im going to see if the front settles a bit over the next week. Might raise the rear up just a tad. This corners with such little body Roll now. Definitely gives it a sinister look imo. In the process of refinishing my wheels to a gloss black. 12 & 15 mm spacers going on afterwards.I will be sure to get before & after pics.
|
|
Appreciate
0
|
| 10-13-2017, 03:40 PM | #12 |
|
Alpine White M Performance
37
Rep 252
Posts |
12MM spacers on up Front & 15mm in the rear. Happy with both my wheels and calipers. Downpipes & Tune for my M Performance next.Adjusted my end links on rear adjustable suspension and it drives perfect! I used 3 coats of primer, paint & gloss for both wheels & calipers.
|
|
Appreciate
0
|
| 10-13-2017, 09:48 PM | #14 |
|
Colonel
 
431
Rep 2,062
Posts |
1) Unless the 5.0 is different than the X5M, I'm pretty sure they only make 1.2" & 2".
2) Your stickers are upside down, they should be flipped over so they're read the same way as the BMW letters are factory stamped on the calipers. Looks good though :-) |
|
Appreciate
0
|
| 10-14-2017, 10:10 AM | #15 |
|
Alpine White M Performance
37
Rep 252
Posts |
[QUOTE=m5james;22303752]1) Unless the 5.0 is different than the X5M, I'm pretty sure they only make 1.2" & 2".
2) Your stickers are upside down, they should be flipped over so they're read the same way as the BMW letters are factory stamped on the calipers. Yes 2. Thanks for pointing that out. Doing my wifes 335 next So I will get it right |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
