09-05-2014, 10:37 AM | #1 |
New Member
8
Rep 23
Posts |
X5M Wheel question - do I have to go staggered?
Question
What are the pitfalls if any of going non staggered for a new wheel setup? Can I do 20x10 or 22x10 all around? Or suggestions?? Thanks for answering a newb question Ryan
__________________
Name: Ryan
Location: Denver CO Daily Driver: Mineral White X6M F86 |
09-05-2014, 11:18 AM | #2 |
Captain
107
Rep 994
Posts |
Absolutely can go the same size all around. In fact, it might be better since you can now rotate tires... Of course offset plays a part here too, so make sure to take that into account.
|
Appreciate
0
|
09-05-2014, 11:42 AM | #3 |
Lieutenant Colonel
1071
Rep 1,543
Posts |
Offset is going to be critical as previous poster pointed out, spacers are another alternative. In addition, some of the current driving dynamics will be affected. Plus you may or may not like the look since it will be less aggressive.
|
Appreciate
0
|
09-05-2014, 02:40 PM | #4 |
New Member
8
Rep 23
Posts |
Thanks
Sounds like the staggered world is where I need to stay - Am I bound to the 40mm offset in the front and 35mm in the rear or can I decrease that for more aggressive stance?
__________________
Name: Ryan
Location: Denver CO Daily Driver: Mineral White X6M F86 |
Appreciate
0
|
09-06-2014, 06:34 AM | #5 |
New Member
0
Rep 16
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|