12-15-2017, 09:36 AM | #1 |
Private First Class
26
Rep 118
Posts |
H&R wheel spacer figment problem X5M
Just wondering if anyone has had problems with H&R wheel spacer fitment to the hub on their X5M. I ordered some 12mm spacers part number 2475740 and I just received a call telling me the spacer is to shallow for the hub.
I haven't had a chance to lay eyes on the issue yet but I was just trying to find out if anyone else has had this issue. I verified the part number on the box with the shop and everything seems to match up, so I'm not sure if I ordered the wrong ones or if they were packaged incorrectly |
12-15-2017, 10:13 AM | #2 |
Private First Class
26
Rep 118
Posts |
Well I just went by the shop and got some more information. It seems like there's a machine and lip on the inside of these H&R spacers that is not allowing the spacer to sit flush up against the hub. It seems to only lack a few millimeters before being able to sit flush but the concern is even with the wheel bolts being tightened down if the spacer does not sit flush on the hub it would allow for vibration in steering and a ever so slight wobble to the wheel I'm including some pictures let me know what you guys think.
|
Appreciate
0
|
12-15-2017, 10:24 AM | #3 | |
Private
8
Rep 50
Posts |
Quote:
|
|
Appreciate
1
Teh.brandon25.50 |
12-15-2017, 10:57 AM | #4 |
Private First Class
26
Rep 118
Posts |
So just to clarify you have these same spacers, same part number and had to remove a lot of debris and you were able to get them to fit flush?
|
Appreciate
0
|
12-15-2017, 11:53 AM | #5 | ||
Private First Class
26
Rep 118
Posts |
Quote:
|
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|