[shawnsheridan]

Originally Posted by dopper99

Hi Shawn. Please can you PM me details of how to get the E Sys software, token etc.... ie everything for coding and maps for an F30.

Many thanks.

PM sent.

[520369]

Hello guys! could you please help me in my question: I drive BMW 116 F21, so ofcourse I want to make it better I`ve already coded everything needed but I`m afraid of flashing DME. I`ve puted 0 motor hours already for flashing. Is it possible to change comlectation with Esys to 118 and after flash complete car with IstaP? or maybe possible to flash only DME & EGS with Esys without changing VO? Thank you

[Buckeyes]

Ok, I hooked the cable to the car and under open connection but nothing is popping up but my vin is shown in the "connect via vin". Any ideas?

[Buckeyes]

Nevermind I fix it

[crysssz]

Hi Shawn.
Please can you PM me details of how to get the E-Sys software and the PSDZDATA for F30?

thanks!

Christian

[shawnsheridan]

Originally Posted by crysssz

Hi Shawn.
Please can you PM me details of how to get the E-Sys software and the PSDZDATA for F30?

thanks!

Christian

PM sent.

[520369]

Originally Posted by 520369

Hello guys! could you please help me in my question: I drive BMW 116 F21, so ofcourse I want to make it better I`ve already coded everything needed but I`m afraid of flashing DME. I`ve puted 0 motor hours already for flashing. Is it possible to change comlectation with Esys to 118 and after flash complete car with IstaP? or maybe possible to flash only DME & EGS with Esys without changing VO? Thank you

Shawn, maybe you can help?

[shawnsheridan]

Originally Posted by 520369

Shawn, maybe you can help?

No, sorry. Flash DME is easy, but to flash DME from 116 to 118 is not so easy.

[520369]

Originally Posted by shawnsheridan

No, sorry. Flash DME is easy, but to flash DME from 116 to 118 is not so easy.

but possible? I can`t sleep thinkin` of it))
as I understood from poor information on web, the most difficult is to put zero motor hours in car.. but nobody whants to give an advice instead of "go to a specialist"((

[kelseybcool]

This seems to be the thread to do it. I printed out the instructions page, but like everyone else I could use a hand obtaining the E-Sys program if at all possible.

Thanks in Advance! I just got my hands on a 2014 F30 and am anxious to see what I can do!

[shawnsheridan]

Originally Posted by 520369

but possible? I can`t sleep thinkin` of it))
as I understood from poor information on web, the most difficult is to put zero motor hours in car.. but nobody whants to give an advice instead of "go to a specialist"((

The only case I know is where maisav flashed his 523i DME to 528i.

See this thread:

http://www.bimmerfest.com/forums/sho...d.php?t=694166

[shawnsheridan]

Originally Posted by kelseybcool

This seems to be the thread to do it. I printed out the instructions page, but like everyone else I could use a hand obtaining the E-Sys program if at all possible.

Thanks in Advance! I just got my hands on a 2014 F30 and am anxious to see what I can do!

PM sent.

[Buckeyes]

I had a very successful coding session yesterday. Removed the disclaimer for I drive and both cameras, tpms temp and pressure, seat belt chime 1 second, and digital speed.

Question is can you code/change multiple functions at the same time or just one at a time?

[shawnsheridan]

Yes, so long as they are in they same ECU.

[williammm]

After update to South East Asia Premium 2015 map.. it seems the live traffic info isn't working. Is there something wrong?

[shawnsheridan]

Originally Posted by williammm

After update to South East Asia Premium 2015 map.. it seems the live traffic info isn't working. Is there something wrong?

TMC didn't work in Southeast Asia PREMIUM 2014 either. The last version it worked in was 2013-2.

[Buckeyes]

Question about changing angel eye brightness when headlamps on. Default is 8% but drop menu shows 8% 10% 12% and then different v values? Anyone code thus and remember if you changed to a V value or just Changed the werte value to 64? Thanks

[Frogman]

Originally Posted by Trcb777

Question about changing angel eye brightness when headlamps on. Default is 8% but drop menu shows 8% 10% 12% and then different v values? Anyone code thus and remember if you changed to a V value or just Changed the werte value to 64? Thanks

In some versions of the CAFD, you can select 100%, so if that is an option, you might as well select that.

In versions without 100% as an option, I've directly entered 64 and had it work fine. I've also done 32 (50%) on a lot of cars as 100% is really bright at night.

[Buckeyes]

Thank you

[Nostromo72]

Hello Shawn,
I own a BMW 335d M sport with a professional media. I'd like to unlock some functions with E Sys.
Can you PM details of how to get the E Sys software, token, pin and so on... to code my F30, please?

Thank you very much

[jjduailibe]

Originally Posted by shawnsheridan

cafd_00000794.caf.007_029_103:

http://www.filedropper.com/cafd00000794caf_1

Good night,

shawnsheridan, I'm sorry to be asking so long after you've provided the link, but the link stopped working.


I need the following file:

50.4_PSdZData_Full / psdzdata / swe / CAFD / cafd_00000794.caf.007_029_103


or cafd_00000794.caf.007_029_103

is the same file you uploaded to the forum fellow named ccyosh


Thank you for your help
(Hugs from Brazil)

Joao

[shawnsheridan]

Originally Posted by Nostromo72

Hello Shawn,
I own a BMW 335d M sport with a professional media. I'd like to unlock some functions with E Sys.
Can you PM details of how to get the E Sys software, token, pin and so on... to code my F30, please?

Thank you very much

PM sent.