Can i install X6m bodykit to X6 35i ?

[ggleet]

Hello brothers and sisters, does anyone know can i actually install x6m body kit into x6 35i? including front and rear bumpers, side skirts and 'M' Fender? Plug and play? From what i know, E90 'M' bumper will not fit into 'Non-M'

I had a minor accident last few days, and i found someone is selling his whole x6m bodykit after he convert into hamann tycoon.
-================================================== ==================-


Done~!
X6m front bumper and side skirt are basically plug and play. Just have to change few small parts.
-Mesh below the grill. X6 are round bottom corner, x6m are rectangular
-modified a bit on plastic cover under the bumper, i just cut it to fit x6m bumper.
-covers for the 2 holes for car towing hook

The x6m side skirt also fit x6 rear bumper.

sorry for bad grammar, lol. i just want to share for those want to convert.



Next item i want to get is carbon fiber hood,ecu tuning and exhaust

[alpineweiss300]

Originally Posted by ggleet

Hello brothers and sisters, does anyone know can i actually install x6m body kit into x6 35i? including front and rear bumpers, side skirts and 'M' Fender? Plug and play? From what i know, E90 'M' bumper will not fit into 'Non-M'

I had a minor accident last few days, and i found someone is selling his whole x6m bodykit after he convert into hamann tycoon.
Sorry for bad english

I am pretty sure you can replace some of the parts, like bumpers, fenders etc as long as you dont mess up the electrical circuits. No reason why a competent body shop cant do that but why?

[somonster]

Originally Posted by ggleet

Hello brothers and sisters, does anyone know can i actually install x6m body kit into x6 35i? including front and rear bumpers, side skirts and 'M' Fender? Plug and play? From what i know, E90 'M' bumper will not fit into 'Non-M'

I had a minor accident last few days, and i found someone is selling his whole x6m bodykit after he convert into hamann tycoon.
Sorry for bad english

Hi,

Sorry to hear you had an accident - I wish your car a speedy recovery!

Let me start by saying I'M NOT SURE, but here are my thoughts.
If you change the bumpers you may run into problems with all the electronic functions and error codes with the fog/turning lights (not in the bumper on the x6m), exhaust routing, parking sensors or side cameras, etc...
It sounds like a big job that would require a lot of secondary modifications (new headlights, completely new exhaust including custom fabricated parts as the I6 is different shaped than the V8, etc...) to accommodate the change. Whether that's worth it, well, for me it would depend on the cost.

I must admit, I like the aggressive look of the x6m. If it was an option, I would have liked an M appearance package when I ordered my car.
I don't care for the factory performance body kit available for the non-M cars.

[ggleet]

First of all i want to thank you alpineweiss300 and somonster for the feedbacks.

:somonster
I thought the headlights for x6m and x6 are the same? i think i wont need to get new set of headlights. For the fog lamp, i'll still install it and hide behind bumper, and wont switch it on.




THanks again

[DevilAngel]

can be done without some minor issues,

headlight no difference
foglight can be deleted, need to do a software error code cancellation
pdc can be re-route, no issue
exhaust will be major mod
mesh between bonnet and bumper is different shape
all wheel arches need to be X6M profile

you need front and rear bumper, front fenders, wheel arches, I think there's about all.

happy modding...

[ggleet]

Originally Posted by DevilAngel

can be done without some minor issues,

headlight no difference
foglight can be deleted, need to do a software error code cancellation
pdc can be re-route, no issue
exhaust will be major mod
mesh between bonnet and bumper is different shape
all wheel arches need to be X6M profile

you need front and rear bumper, front fenders, wheel arches, I think there's about all.

happy modding...

I might consider not to install the rear bumper due to exhaust,
Thanks for confirmation on headlight

This is what i going to get this tomorrow, its quite cheap huh?
http://www.mudah.my/BMW+X6+M+ORIGINA...it-9921149.htm
RM24,000 is equal to USD7,984.03

DevilAngel, what modification you do on your x6?

[somonster]

In another thread, someone mentioned that the X6M had fog/turning lights integrated into the headlight assembly? possibly between the inner and outer rings?
I have no idea myself (I've never even SEEN an x6m in person), but just something I read on this forum.


Too bad about the back bumper, though. I like that piece.

Post some pics if you decide to do the swap!

[DevilAngel]

mine is an AW 2011 35i model, N55 engine

BMW performance aerokit, rear fins, spolier, gun-metal style 214 rims,
gloss black kidney grill, all black plastic trims painted to AW

I'll try to post some photos, haven't taken photo yet

Btw, I want the X6M original rim, do you mind letting it go?

[ggleet]

Originally Posted by DevilAngel

mine is an AW 2011 35i model, N55 engine

BMW performance aerokit, rear fins, spolier, gun-metal style 214 rims,
gloss black kidney grill, all black plastic trims painted to AW

I'll try to post some photos, haven't taken photo yet

Btw, I want the X6M original rim, do you mind letting it go?

that seller sold the rims separately already.... I can only buy the bodykit... Just curious, how much would u pay for those rims

[GMP - MATTHEW]

I can sell you the complete Hamann body kit for probably the same price as what it will cost to buy all the OEM parts your going to need.

[GMP - MATTHEW]

This wide body kit can be had for about 15k, Front Bumper with 4 led lights, Front Fenders, Side Skirts, Rear fender arches, Rear diffuser with center exit mufflers, roof spoiler and trunk spoiler.

[AndreyATC]

This is what i would get if i had non-M X6 that needed cosmetic changes

http://www.xbimmers.com/forums/showp...78&postcount=4

[GMP - MATTHEW]

Originally Posted by AndreyATC

This is what i would get if i had non-M X6 that needed cosmetic changes

http://www.xbimmers.com/forums/showp...78&postcount=4

Is it available in the states to purchase? How much?

[Glina]

[QUOTE=GMP - MATTHEW;9791766][QUOTE=AndreyATC;9791626]This is what i would get if i had non-M X6 that needed cosmetic changes

[url]http://www.xbimmers.com/forums/showpost.php?p=9782178

[ggleet]

Updated

[zerrantoss]

Looks great! Thank you for sharing the possibility.

[Kin]

Originally Posted by ggleet

Hello brothers and sisters, does anyone know can i actually install x6m body kit into x6 35i? including front and rear bumpers, side skirts and 'M' Fender? Plug and play? From what i know, E90 'M' bumper will not fit into 'Non-M'

I had a minor accident last few days, and i found someone is selling his whole x6m bodykit after he convert into hamann tycoon.
-================================================== ==================-


Done~!
X6m front bumper and side skirt are basically plug and play. Just have to change few small parts.
-Mesh below the grill. X6 are round bottom corner, x6m are rectangular
-modified a bit on plastic cover under the bumper, i just cut it to fit x6m bumper.
-covers for the 2 holes for car towing hook

The x6m side skirt also fit x6 rear bumper.

sorry for bad grammar, lol. i just want to share for those want to convert.



Next item i want to get is carbon fiber hood,ecu tuning and exhaust

Hi, do you know any friends who are using the UK spec BMW X6 30d (diesel) in Malaysia? I am Kin from UK and I wish to bring a UK BMW X6 30d back to Malaysia but I am doubt with the Malaysia disesel quality. Can the BMW X6 30d use Malaysia diesel which is euro 2 only?? thank you.

[ggleet]

Originally Posted by Kin

Hi, do you know any friends who are using the UK spec BMW X6 30d (diesel) in Malaysia? I am Kin from UK and I wish to bring a UK BMW X6 30d back to Malaysia but I am doubt with the Malaysia disesel quality. Can the BMW X6 30d use Malaysia diesel which is euro 2 only?? thank you.

I dont have any friend with x6 diesel in my place, but 1 of my friend is driving x3 diesel, its quite powerful. i'm not so sure about x6 diesel

By the way, Malaysia bmw dealer only sell X1 and X3 in diesel, not x6.

[Kin]

Originally Posted by ggleet

I dont have any friend with x6 diesel in my place, but 1 of my friend is driving x3 diesel, its quite powerful. i'm not so sure about x6 diesel

By the way, Malaysia bmw dealer only sell X1 and X3 in diesel, not x6.

I assume the UK BMW X6 30d should fit the Malaysia diesel because BMW Malaysia is selling BMW X5 30d in Malaysia currently and both these models got the same engine therefore they should be alright, am i right?? Do you know any BMW expert working in BMW Malaysia? I wish to bring an UK BMW X6 30d back to Malaysia but i am afraid with diesel issue in Malaysia. Thank you bro!!!