04-04-2022, 03:56 PM | #1 |
Registered
3
Rep 4
Posts |
E70 N55 Oil Pan Gasket video
I spent a weekend dropping the front subframe and swapping the oil pan gasket, struts, engine mounts, etc. I haven't done this job before, but I filmed the process in case somebody wants to learn from my mistakes. It's not really a DIY since there's several hours of footage; more of something to reference if you get stuck doing the same job.
Part 1: Part 2: Part 3: And here are the basic steps I took:
Hopefully this is useful to someone. |
12-12-2022, 09:05 AM | #2 |
Anxious!
3
Rep 35
Posts |
Chris, thank you for posting these videos and torque values, definitely helpful. I finally DIY'd my leaky oil pan gasket on my 2013 X5 N55. I also replaced both motor mounts, the front right axle, all the front suspension components and associated bolts and nuts, rear shocks, springs, sway bar links, rubber pads, and associated bolts and nuts, and yes it was a chore.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|