|
|
|
| 10-31-2023, 05:52 PM | #1 |
|
Enlisted Member
 6
Rep 40
Posts |
Replaced oil level sensor - Now Measurement Inactive
My Oil level sensor had been concerning me for awhile as it ALWAYS read Max even when I added 2 extra quarts or had driven it for 2000 miles. I decided to replace it, but now it just says "Measurement Inactive - Service Interval Changed".
I've tried resetting the oil change via the ODO menu. No luck. Do I need ISTA software to reset the oil level sensor? Should I just put the old one back on? |
| 10-31-2023, 07:17 PM | #2 |
|
First Lieutenant
 
250
Rep 391
Posts
Drives: 2006 M5, 2012 X5d, 2008 E91
Join Date: Aug 2012
Location: Seattle
|
A new sensor shouldn't need to be coded. Do you have any diagnostic software? You may need to clear any codes or just drive it for a while to see if it resets itself.
|
| 10-31-2023, 09:37 PM | #3 |
|
First Lieutenant
123
Rep 376
Posts
Drives: '23 AMG GLE53, '10 X6M
Join Date: Feb 2016
Location: NJ 08805
|
Yeh sounds like the DME has to relearn or whatever pretend AI thing it does
__________________
'10 X6M
'08 Cooper S |
|
Appreciate
0
|
| 11-01-2023, 10:57 AM | #4 | |
|
Enlisted Member
6
Rep 40
Posts |
Quote:
|
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
