07-11-2017, 10:42 PM | #1 |
First Lieutenant
169
Rep 347
Posts |
X5m front bumper removal?
I searched youtube and the forums real quick for a diy on removing the x5m front bumper and i can't find anything. Anyone have a diagram or "how-to" video? One of my front sesnsor is pushed in and i want to fix it.
|
07-12-2017, 03:04 AM | #2 |
Lieutenant
378
Rep 514
Posts |
1) Remove the reflectors with a removal tool, reveals 1 hex head 8mm bolt (1 under each reflector)
2) Open the hood and there will be 4x 8mm just above the bumpers upper small grill 3) Remove clips under each side fender liner that goes through to the bumper 4) There are series Torx bit screws on the under carraige liner underneath along the lower bumper Once there all removed the bumper cover should pop off. Just be careful to have something to sit the cover on so you can get access to the plug for parking sensors (all 4 sensor wires goes to 1 plug) and also your headlamp washer plugs. Shouldn't take more than 20 mins! |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|