06-23-2015, 08:35 AM | #1 |
New Member
4
Rep 16
Posts
Drives: BMW X6 xDrive 40d
Join Date: Feb 2015
Location: Bulgaria
|
BMW X6 E71 Coding Software & Cables
I am new to BMW cars. Current vehicle is a X6 xDrive 40d (European) from 2013 and I would like enable/disable some features but don't know what software I need and where to find it.
I did some google research but didn't find anything so I would appreciate it if someone helps a bit. Thanks! |
06-24-2015, 12:25 PM | #2 |
Private First Class
32
Rep 188
Posts
Drives: 2012 BMW X6 50i
Join Date: Nov 2012
Location: Michigan
|
Welcome.
The link below will guide you to everything you need to know about coding. http://www.e90post.com/forums/showthread.php?t=451145 Good luck! |
Appreciate
0
|
06-26-2015, 03:57 PM | #3 |
Lieutenant Colonel
89
Rep 1,882
Posts |
I just did this with help from this guy, I paid a little extra to get a session with him but well worth it. He installed all of the software on my system (this can be daunting for a newbie like me to coding) and made some mods for me (I ran screen recording so I could study it later). After looking at the software install and stuff if you find your not comfortable like I was I recommend his service. He was helpful in tracking down a cable for my car as the one I had bought was not the correct one.
Here is the Fiverr link http://fiverr.com/cj83lex/give-you-e...-code-your-bmw For only $5, cj83lex will give you everything you need to code your BMW. I will give you a package containing the following: - EDIABAS - BMW INPA (used for Diagnosis and error resetting) - BMW NCS Expert Tool UPDATE: since first doing this 3 years ago with help from above , I installed Esys on my laptop and read a lot in the coding forums. I have recoded my car sucessfully 4 times . The new technologies that are coming out now make this a lot easier and are phone based, lot easier than dragging laptop around.
__________________
2022 X6MC - 2011 335D
Last edited by dmlgc; 07-11-2019 at 07:45 PM.. Reason: Update |
Appreciate
0
|
07-11-2019, 02:29 PM | #4 |
Registered
0
Rep 1
Posts |
If anyone is interested in learning how to code the x6m you can checkout my youtube channel its the same as my username here. It only cost me 20$ and I coded it myself.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
coding, coding cable, coding software, e71 |
|
|