LED interior lights

[crunchingnumbers]

Does anyone have a clue on how to change the interior bulb in the map light. The two either side are easy but rather than prying and digging, I thought I would ask about the dome light. Does the whole dome assy come down or just the clear plastic cover. Are there hidden clips etc etc.

I know someone here has done it

Well being impatient. I found that if you pull down and rearwards on the front of the entire dome assembly it releases. You will see the bulb housings there for the three bulbs which twist and release. The bulbs then just pop out and the LED replacements just pop back in (spade connector). To replace the dome assay simply slot the rear in first and then press upwards on the front.

Hope that helps someone else