12-26-2021, 03:24 PM | #1 |
New Member
0
Rep 16
Posts |
Getting a set of style 214 wheels + new tires
Hello, first time posting but I've been lurking for quite a while.
I've got an E70 from 2008, and I've been looking at getting a new set of wheels for it. I've found a set local to me, which have been recently powder coated. They have however previously been welded, is this a big issue? See the attached photos. Furthermore If i decide to buy them, i would have to get a new set of tires. Which tires can people recommend? I'm looking at a staggered setup: 275/40/R20 Front 315/35/R20 Rear I've been looking at the Falken FK510, Dunlop Sport Maxx RT2 and the Hankook Ventus S1. Thanks for your feedback in advance. |
01-01-2022, 12:28 AM | #3 |
Lieutenant
288
Rep 593
Posts |
You would be insane to buy them. Aluminum does not weld well, and it will have bunch of microcracks. Whoever welded these did not even bother grinding these welds smooth, they just concealed the crappy job with powder coat.
Just get a a set of new wheels from the dealer, I know they are expensive, but it's your safety. |
Appreciate
0
|
01-01-2022, 02:54 PM | #4 |
New Member
0
Rep 16
Posts |
I appreciate your feedback, but i already bought the wheels.
According to the seller (professional powder coater) the previous owner rode with them as they were welded, the seller then repainted them. Furthermore i wasn't aware that BMW even made 214's anymore. Buying the wheel might turn out to be a poor choice, but it's a choice I've made regardless. Can you recommend me tyres? |
Appreciate
0
|
01-04-2022, 04:35 PM | #5 | |
First Lieutenant
62
Rep 398
Posts |
Quote:
I strongly suspect if the person doing the welding on these was a professional, the welding will hold up fine. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|