11-28-2022, 02:55 PM | #1 |
Running Late
89
Rep 168
Posts |
20"s with a little meat?
Time for new tires, is anyone running the factory snowflake 20's (staggered) with tires that are a little beefier than sport/street tires?
I can't seem to find much and am leaning towards the Bridgestone Alenza AS Ultra's. Post up some pics if you got anything that works with these wheels.. would love to see what everyones running. Thank you,
__________________
|
12-04-2022, 01:13 PM | #2 |
Private First Class
36
Rep 114
Posts |
I'm running aftermarket 20's on a square set up so I can still rotate the tires, as I drive 7-8k miles a month... And a staggered setup would just not be useful to me... I chose to accept a little speedometer offset from a factory tires diameter... About 1mph at 70 off base... And I'm running 275/45/20's that have a decent side wall and still look good... Not to mention I found non runflats for about $115 a tire .. so low in fact I bought 8 of them so I have new ones when the first set wears out in 7-8 months....
|
Appreciate
0
|
12-05-2022, 06:24 PM | #4 | |
Captain
260
Rep 714
Posts |
Quote:
|
|
Appreciate
0
|
12-06-2022, 08:34 PM | #5 |
Private First Class
36
Rep 114
Posts |
|
Appreciate
0
|
12-16-2022, 10:51 AM | #6 |
Captain
581
Rep 673
Posts |
Someone say meat?
295/45/20. It rubs, copy at your own risk. More details in my build thread on this forum. Evan
__________________
N54 Powered M5 Wagon:
- M5 Shaft, M5 LSD, M5 Axles, M5 Brakes, M5 Front End, M5 skirts, M5 Mirrors - Manual Swap, MFactory SMFW, Spec Stg 3+, KW V3, RD Sport Sways, F14 SDC - EOS Port Injection Manifold, Fuel-It: Stg 2 LPFP +Lines +Ethanol Sensor - JB4, Hexon RR550s, Custom Inlet, AR DPs, 3" Exhaust, VRSF 7" IC, ER CP +Tial |
Appreciate
1
workinglate0.00 |
12-21-2022, 12:55 AM | #7 |
Running Late
89
Rep 168
Posts |
I <3 your build.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|