2" drop vs 1.2" drop X5M

[UnicornM]

Originally Posted by makisupa

Has anyone bagged their e70? I can't recall any photos or even a real discussion about it. I don't think anyone makes a kit, but I know Airlift has a universal kit. That potentially could get the drop you want with out sacrificing on ride comfort.

I have. You can read my thoughts here -> http://www.xbimmers.com/forums/showt...1134650&page=4

Not cheap. But for performance, comfort and infinite adjustability its a winner.

[StatenEye]

Originally Posted by Phatcat

Mine with KW. [IMG][/IMG]

Looks perfect.

[fourpointeight]

Originally Posted by Kerrazy

Hey FourPointeight, I may install 2" soon, If too "bouncy I may take you up on that offer of trades for your 1.2" ""

I am in Calgary so not far....lets keep in touch !

Sure thing

[gixxerboy63]

Originally Posted by Phatcat

Mine with KW.

1.2 or 2.0?

[makisupa]

Originally Posted by X5_MSPORT

I have. You can read my thoughts here -> http://www.xbimmers.com/forums/showt...650&page=4

Not cheap. But for performance, comfort and infinite adjustability its a winner.

Ok that is amazing. Your ride is killer. Do you have any pics of your trunk set up? Curious as to how you did you tanks/compressors, manifold, etc. bravo sir.

[UnicornM]

Originally Posted by makisupa

Ok that is amazing. Your ride is killer. Do you have any pics of your trunk set up? Curious as to how you did you tanks/compressors, manifold, etc. bravo sir.

Thanks. Updated the thread. Still more pics to come though.

[StatenEye]

Heres a good write up with great pics.

http://www.xoutpost.com/bmw-sav-foru...lots-pics.html

[Toneaero]

I adjusted the rear linkages so it doesn't bounce. Just a small rake. Id prefer a little raked look anyways. (rear slightly higher than front).

Its the sudden jarring of cracks and bumps is whats bruising my kidneys. My buddy thinks its hitting the bump stops.

[socale39]

I've lowered numerous cars in the past and anything more than 1.5" drop we would cut down the bump stops because of the very reason mentioned above.

[Da808dad]

Here's my wife's old x5m with the H&R 2" drop.

As for ride quality, it's like everyone else said, don't put the endlinks all the way down. It is bumpier than stock but I think it's worth it for the look.

If you're interested, I have my 2" drop that I'll sell you cheap since I no longer have the x5m.

[UnicornM]

Originally Posted by Da808dad

Here's my wife's old x5m with the H&R 2" drop.

As for ride quality, it's like everyone else said, don't put the endlinks all the way down. It is bumpier than stock but I think it's worth it for the look.

If you're interested, I have my 2" drop that I'll sell you cheap since I no longer have the x5m.

Gimme those wheels!

[Da808dad]

Originally Posted by X5_MSPORT

Gimme those wheels!

Sorry they are already sold.

[Kerrazy]

Stateneye can you tell me how long you set your rear links to to "rake' the ride on your 2" drop kit

Just curious how high I should raise the rear

[mic06]

I have the 1.2 h&r setup and it's great I really like the way it handles

[StatenEye]

Originally Posted by Kerrazy

Stateneye can you tell me how long you set your rear links to to "rake' the ride on your 2" drop kit

Just curious how high I should raise the rear

Hey i didnt do the install yet but the thread i posted above had exact measurements.

[ashawkys]

subscribed!

[Qarban]

My truck will have these 1.2" H&R Springs installed tomorrow and as suggested above I will tell the installer to adjust the rear links to 67 mm. Question: Is there a possibility for the rear link's bolts to get loose while driving and cause problem? Should I request the installer to blue Loctite them or weld the bolts? Thanks!

[StatenEye]

Originally Posted by Qarban

My truck will have these 1.2" H&R Springs installed tomorrow and as suggested above I will tell the installer to adjust the rear links to 67 mm. Question: Is there a possibility for the rear link's bolts to get loose while driving and cause problem? Should I request the installer to blue Loctite them or weld the bolts? Thanks!

If not installed correctly i guess its possible but these are just replacing the stock links so i think you should be fine with the lock washer. Post pics. I chickened out on the 2" drop. Ill be going with 21"s and a 1.2" drop vs 20"s with a 2" drop. My new wheels should arrive next Friday so hopefully ill have the springs installed by then.

PS be sure to ask the shop to do post install height measurements. Measure from the wheel well to the floor and ensure you have rake.

[Qarban]

I dropped off the truck this morning and will not be able to pick it up until Thursday because aside from the springs they will also disassemble the calipers and send to the auto paint shop for painting

[StatenEye]

Originally Posted by Qarban

I dropped off the truck this morning and will not be able to pick it up until Thursday because aside from the springs they will also disassemble the calipers and send to the auto paint shop for painting

What color for the Calipers? What color is your truck?

[Qarban]

Originally Posted by StatenEye 535i

What color for the Calipers? What color is your truck?

Blue color for the calipers. My truck is alpine white

[0-60Motorsports]

Bumping this up for any more reviews and pics.