XBimmers.com | BMW X6 Forum X5 Forum
 
TireRack



BMW Garage BMW Meets Register Today's Posts


Go Back   XBimmers.com | BMW X6 Forum X5 Forum > BIMMERPOST Universal Forums > Sim Racing

Post Reply
 
Thread Tools Search this Thread
      12-02-2022, 08:48 AM   #23
Theruleslawyer
Captain
Theruleslawyer's Avatar
United_States
1048
Rep
860
Posts

Drives: 2019 m4
Join Date: Apr 2022
Location: Chicagoland

iTrader: (0)

Quote:
Originally Posted by jfritz27 View Post
What are you guys running for wheel/pedal setups? I've only had this Logitech G29... definitely don't want to drop the $$ now as I've been spending it elsewhere, but for those with comparison experience, would something like a CSL DD + CSL pedals w/ load cell be "leaps and bounds" better?
Simagic Alpha with the GTC wheel. T-LCM pedal and Th8a shifter.

There are a couple things you get-

More Force
A g29 is like 2.2nm, a high end belt like a t-gt is 5.8nm. Low end DD are 5-8ish. The alpha is a 15nm base, and really high end ones go up to 30ish. For GT3 in iracing I run mid 60% force scaling on the alpha. Its a workout.

This allows a few things-
1) Realistic forces. Especially open wheelers need high forces to replicate real steering. 10nm is probably fine for most people/cars.
2) Force scaling. For subtle forces to be perceptible they have to be a certain force. On weaker wheels that means bigger forces feel a lot closer to small forces and it can make everything muddy or you just end up turning small forces off. Its a harder balance.
3) headroom for no clipping, running larger diameter wheels, etc.

Better reaction/detail
Just due to the construction there is zero lash/stretch in a DD system. Its a little like putting solid bushings on your car. Everything is a little sharper. I've heard people say they can tell when they go over a paint line on a well setup track on dd.

So going from something like a g29 to a low end DD is going to be a huge jump. You'll get 3-5x the force. The detail will be significantly better.

If you only have a little to spend right now get a set of the t-lcm pedals. They are load cell pedals and will be light years better than the g29 pedals. There were some good sales over BF, but even at $230 they are well worth it. They'll probably do more to make you faster than a new wheel anyways.
Appreciate 1
jfritz271448.50
      12-02-2022, 09:45 AM   #24
jfritz27
Major
jfritz27's Avatar
1449
Rep
1,439
Posts

Drives: 2018 F80 CS
Join Date: Dec 2014
Location: New Jersey

iTrader: (0)

Thanks guys

Those pedals do seem like good value -- any thoughts on these vs Fanatec's CSL pedals? Would there be any software/compatibility concerns with a mixed-brand setup down the line (T pedals with a Fanatec DD for example)? I guess everything has its own config software so I guess shouldn't matter...
Appreciate 0
      12-02-2022, 09:48 AM   #25
NYG
Brigadier General
NYG's Avatar
United_States
11840
Rep
4,174
Posts

Drives: Audi R8
Join Date: Feb 2017
Location: Brooklyn, NY

iTrader: (0)

Quote:
Originally Posted by jfritz27 View Post
Thanks guys

Those pedals do seem like good value -- any thoughts on these vs Fanatec's CSL pedals? Would there be any software/compatibility concerns with a mixed-brand setup down the line (T pedals with a Fanatec DD for example)? I guess everything has its own config software so I guess shouldn't matter...
V3 > LCM > CSL

I don't think you'll have any problems mixing but no experience.
Appreciate 2
      12-02-2022, 09:54 AM   #26
Theruleslawyer
Captain
Theruleslawyer's Avatar
United_States
1048
Rep
860
Posts

Drives: 2019 m4
Join Date: Apr 2022
Location: Chicagoland

iTrader: (0)

Quote:
Originally Posted by jfritz27 View Post
Thanks guys

Those pedals do seem like good value -- any thoughts on these vs Fanatec's CSL pedals? Would there be any software/compatibility concerns with a mixed-brand setup down the line (T pedals with a Fanatec DD for example)? I guess everything has its own config software so I guess shouldn't matter...
I mix already. The tlcm are usb. Cheapo pedals plug in through your wheel and need to be compatible . Same with shifters. Higher end stuff just shows up as multiple devices

The real benefit is your device configuration software can swap presets for everything at once. If you ever want to play on console you will need to worry more.

If you play less sim centric games you may run into issues as a few of those do stupid things like only mapping one controller. It might be solvable via software, but I haven't looked.
Appreciate 1
jfritz271448.50
Post Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:55 PM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST