06-12-2023, 01:20 PM | #1 |
Registered
0
Rep 1
Posts |
BMW X5 Misfire codes After Valvetronic motor swap
Hey Guys,
So I am doing a job on a buddys car where I did basic diagnostics on and found it needed a valvetronic motor replced went thru ordered parts tore the motor down removed coils and injectors removed old motor and installed new one put motor back toghter with new gaskets and seals installed new seals on all injectors installed everything at torqued to spec started unit and unit coeds on the dash for the valvetronics and a misfire on cylinder 3 the codes were 2EFE Combustion Misfire, Several Cylinders: detected 2F01 Misfire, Cylinder 3 2EE0 Misfire, Several Cylinders fuel injector deactivation 2EEA Misfire, Cylinder 3: Fuel Injection deavtivation 2FAA Ignition, Cylinder 3: combustion periord too short and it has a bunch of other codes cause the batter died while working on the car as well as the valvetronic codes due to not being able to reprogram the motor yet as car wont start or stay runing for code reader to prformed reprogram all injectors and coils made it back to the same hole i pulled them from just in case they were coded pre each hole looking for advise dont work on foren cars at all and need to figure out why this car is codeding for a misfire it didnt come in with |
Post Reply |
Bookmarks |
|
|