Active Autowerke | X5M / X6M / X 50i 3" Catless Downpipes

[Andrew@ActiveAutowerke]

Active Autowerke






A turbo impeller wheel speed is mostly limited by the exhaust back pressure within the system. If one could eliminate some or most of this exhaust back pressure, the turbo will spool that much faster and effortlessly resulting in quicker engine revs and increase HP. The Active Autowerke Signature down pipe is designed with the intent to maximize in power. The down pipes are created with the least amount of restrictions possible by utilizing a full 3" piping throughout with the least amount of bends possible, that is impressive when compared to the factory diameter of 2.50". What you will experience is a faster, more responsive engine because the turbo impeller now has the ability to spool that much faster. The end result is more power. For added durability, factory like support braces are also implemented to alleviate stresses upon the turbos. Made from 304 stainless throughout ensures a robust and durable exhaust that will provide trouble free performance with the longevity to match.

note: designed for off-road use, car will have CEL without Active Autowerke Software Upgrade for Off-Road use http://www.xbimmers.com/forums/showthread.php?t=669035

Key Features:
- Fits all 4.4l Turbo Engines M & Non M
-Designed with less restrictive curves and more straight flows
-30+ HP Gains
-Full 3.00" diameter piping throughout allows for maximum power output
-Quicker turbo spool
-Durable construction from 304 stainless with 1.50mm wall thickness
-Precise fit installation

[Phipsibear42]

I'm tempted Andy!!

[Andrew@ActiveAutowerke]

We have one set left in stock !

[linearequation]

does this void the original bmw warranty?

[Andrew@ActiveAutowerke]

Originally Posted by linearequation

does this void the original bmw warranty?

If Bmw finds out the car has no cats installed on a vehicle it will void your warranty.

[Andrew@ActiveAutowerke]

We have one set one left in stock. Who's next ?

[X5M Badass]

Pm me price please

[RaTeD ///M]

So that a full 3 inch piping all the way through and doesn't taper down to a smaller size on both ends? In addition, how much louder does it make the car over stock since their is no resonators?

[Andrew@ActiveAutowerke]

yes 3 inch all the way through. It gets a little louder and deeper with stock exhaust nothing extreme though.

We have 5 left in stock!

[tk6532]

Pm me price please

[Andrew@ActiveAutowerke]

Originally Posted by tk6532

Pm me price please

You have Pm!

[MyM3>UrCar]

pm me price please

[Andrew@ActiveAutowerke]

Originally Posted by MyM3>UrCar

pm me price please

You have Pm !

[dk79]

whats the price for the dps?
how difficult is the install?
what are the dyno gains whp and wtq with and with out tune?

[Andrew@ActiveAutowerke]

Originally Posted by dk79

whats the price for the dps?
how difficult is the install?
what are the dyno gains whp and wtq with and with out tune?

Pmed

[rylee44]

Originally Posted by Andrew@ActiveAutowerke

Pmed

Does this cause any drone in the cabin with stock exchaust? How does it compare to downpipes with resonators? Also I have an Alpine White X5M, how bad is the carbon buildup on the back hatch with this installed?

Thanks!
Ryan

[Andrew@ActiveAutowerke]

Originally Posted by rylee44

Does this cause any drone in the cabin with stock exchaust? How does it compare to downpipes with resonators? Also I have an Alpine White X5M, how bad is the carbon buildup on the back hatch with this installed?

Thanks!
Ryan

No not with a stock exhaust. The carbon build up will be very minimal with the rear cans in place.

[rylee44]

Originally Posted by Andrew@ActiveAutowerke

No not with a stock exhaust. The carbon build up will be very minimal with the rear cans in place.

Does this pair well with the Akrapovic EVO? Do you offer a ceramic coating? Just trying to find my best option. Plan on doing DP's now and Akrapovic EVO down the road. Looking at AR Design, Ultimate, etc, and cant tell which is most important: resonators, hi-flow cats, flex sections, ceramic, etc. I have purchased AA stuff before (Supercharger kits and software) and love the quality and product. Just need some help making a decision :-/

[xpl0sive]

how much for a set for a 2010 X5M? It seems that on your website, the one's for a 2010 are listed under the 5.0 downpipes and they go for $1,299? 2010's have the bolt flanges right?

[Andrew@ActiveAutowerke]

Originally Posted by rylee44

Does this pair well with the Akrapovic EVO? Do you offer a ceramic coating? Just trying to find my best option. Plan on doing DP's now and Akrapovic EVO down the road. Looking at AR Design, Ultimate, etc, and cant tell which is most important: resonators, hi-flow cats, flex sections, ceramic, etc. I have purchased AA stuff before (Supercharger kits and software) and love the quality and product. Just need some help making a decision :-/

[Andrew@ActiveAutowerke]

Originally Posted by xpl0sive

how much for a set for a 2010 X5M? It seems that on your website, the one's for a 2010 are listed under the 5.0 downpipes and they go for $1,299? 2010's have the bolt flanges right?

Yes your model uses the flange type.

[dpie89]

Originally Posted by Andrew@ActiveAutowerke

Yes your model uses the flange type.

I have a 2011 X5 50i.

Which type would I need? Bolt or flange.

Please PM price. Thx