Active Autowerke | X5M / X6M / X 50i 3" Catless Downpipes - XBimmers.com

Andrew@ActiveAutowerke · 08-09-2012, 09:25 AM

Active Autowerke

A turbo impeller wheel speed is mostly limited by the exhaust back pressure within the system. If one could eliminate some or most of this exhaust back pressure, the turbo will spool that much faster and effortlessly resulting in quicker engine revs and increase HP. The Active Autowerke Signature down pipe is designed with the intent to maximize in power. The down pipes are created with the least amount of restrictions possible by utilizing a full 3" piping throughout with the least amount of bends possible, that is impressive when compared to the factory diameter of 2.50". What you will experience is a faster, more responsive engine because the turbo impeller now has the ability to spool that much faster. The end result is more power. For added durability, factory like support braces are also implemented to alleviate stresses upon the turbos. Made from 304 stainless throughout ensures a robust and durable exhaust that will provide trouble free performance with the longevity to match.

note: designed for off-road use, car will have CEL without Active Autowerke Software Upgrade for Off-Road use http://www.xbimmers.com/forums/showthread.php?t=669035

Key Features:
- Fits all 4.4l Turbo Engines M & Non M
-Designed with less restrictive curves and more straight flows
-30+ HP Gains
-Full 3.00" diameter piping throughout allows for maximum power output
-Quicker turbo spool
-Durable construction from 304 stainless with 1.50mm wall thickness
-Precise fit installation

Phipsibear42 · 08-09-2012, 12:23 PM

I'm tempted Andy!!

Andrew@ActiveAutowerke · 08-09-2012, 12:30 PM

We have one set left in stock !

linearequation · 10-03-2012, 11:06 AM

does this void the original bmw warranty?

Andrew@ActiveAutowerke · 10-03-2012, 01:45 PM

Quote:

Originally Posted by linearequation

does this void the original bmw warranty?

If Bmw finds out the car has no cats installed on a vehicle it will void your warranty.

Andrew@ActiveAutowerke · 10-30-2012, 09:37 PM

We have one set one left in stock. Who's next ?

X5M Badass · 11-09-2012, 09:24 PM

Pm me price please

RaTeD ///M · 12-06-2012, 12:20 AM

So that a full 3 inch piping all the way through and doesn't taper down to a smaller size on both ends? In addition, how much louder does it make the car over stock since their is no resonators?

Andrew@ActiveAutowerke · 12-06-2012, 12:35 PM

yes 3 inch all the way through. It gets a little louder and deeper with stock exhaust nothing extreme though.

We have 5 left in stock!

tk6532 · 01-17-2013, 10:24 PM

Pm me price please

Andrew@ActiveAutowerke · 01-22-2013, 05:25 PM

Quote:

Originally Posted by tk6532

Pm me price please

You have Pm!

MyM3>UrCar · 02-01-2013, 12:49 AM

pm me price please

Andrew@ActiveAutowerke · 02-01-2013, 03:21 PM

Quote:

Originally Posted by MyM3>UrCar

pm me price please

You have Pm !

dk79 · 02-06-2013, 06:47 PM

whats the price for the dps?
how difficult is the install?
what are the dyno gains whp and wtq with and with out tune?

Andrew@ActiveAutowerke · 02-12-2013, 11:09 AM

Quote:

Originally Posted by dk79

whats the price for the dps?
how difficult is the install?
what are the dyno gains whp and wtq with and with out tune?

Pmed

08-09-2012, 09:25 AM	#1
Andrew@ActiveAutowerke Colonel Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	Active Autowerke \| X5M / X6M / X 50i 3" Catless Downpipes Active Autowerke A turbo impeller wheel speed is mostly limited by the exhaust back pressure within the system. If one could eliminate some or most of this exhaust back pressure, the turbo will spool that much faster and effortlessly resulting in quicker engine revs and increase HP. The Active Autowerke Signature down pipe is designed with the intent to maximize in power. The down pipes are created with the least amount of restrictions possible by utilizing a full 3" piping throughout with the least amount of bends possible, that is impressive when compared to the factory diameter of 2.50". What you will experience is a faster, more responsive engine because the turbo impeller now has the ability to spool that much faster. The end result is more power. For added durability, factory like support braces are also implemented to alleviate stresses upon the turbos. Made from 304 stainless throughout ensures a robust and durable exhaust that will provide trouble free performance with the longevity to match. note: designed for off-road use, car will have CEL without Active Autowerke Software Upgrade for Off-Road use http://www.xbimmers.com/forums/showthread.php?t=669035 Key Features: - Fits all 4.4l Turbo Engines M & Non M -Designed with less restrictive curves and more straight flows -30+ HP Gains -Full 3.00" diameter piping throughout allows for maximum power output -Quicker turbo spool -Durable construction from 304 stainless with 1.50mm wall thickness -Precise fit installation __________________
	Tweet

08-09-2012, 12:23 PM	#2
Phipsibear42 Private First Class Drives: 2010 X5M Join Date: Apr 2012 Location: NJ Posts: 162 iTrader: (0) Garage List 2010.5 BMW X5M [5.00] 2005 Nissan XTerra ... [3.00]	I'm tempted Andy!! __________________ MORE SPEED PLZ

08-09-2012, 12:30 PM	#3
Andrew@ActiveAutowerke Colonel Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	We have one set left in stock ! __________________

10-30-2012, 09:37 PM	#6
Andrew@ActiveAutowerke Colonel Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	We have one set one left in stock. Who's next ? __________________

12-06-2012, 12:35 PM	#9
Andrew@ActiveAutowerke Colonel Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	yes 3 inch all the way through. It gets a little louder and deeper with stock exhaust nothing extreme though. We have 5 left in stock! __________________

10-03-2012, 11:06 AM	#4
linearequation Registered Drives: 2013 BMW X6 50i Join Date: Aug 2012 Location: Florida Posts: 4 iTrader: (0)	does this void the original bmw warranty?

11-09-2012, 09:24 PM	#7
X5M Badass New Member Drives: BMW X5M Join Date: Nov 2012 Location: UAE, Dubai Posts: 13 iTrader: (0)	Pm me price please

12-06-2012, 12:20 AM	#8
RaTeD ///M Private Drives: 2K12 X5M Join Date: Dec 2012 Location: Anchorage, AK Posts: 57 iTrader: (0)	So that a full 3 inch piping all the way through and doesn't taper down to a smaller size on both ends? In addition, how much louder does it make the car over stock since their is no resonators?

01-17-2013, 10:24 PM	#10
tk6532 Registered Drives: x6 Join Date: Feb 2010 Location: 50I Posts: 4 iTrader: (0)	Pm me price please

02-01-2013, 12:49 AM	#12
MyM3>UrCar Private First Class Drives: AW m3 e92 Join Date: Apr 2009 Location: LA Posts: 162 iTrader: (0)	pm me price please __________________ X5 ///M

02-06-2013, 06:47 PM	#14
dk79 Private Drives: 335i xdrive coupe, 535xi Join Date: Feb 2013 Location: sioux falls, sd Posts: 69 iTrader: (0)	pricing for x6 50i? whats the price for the dps? how difficult is the install? what are the dyno gains whp and wtq with and with out tune?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search