Quote:
Originally Posted by shenard
I am interested in doing this too. Please post some step by step instructions with pics preferably if you tackle this yourself.
I hope someone chimes in that has done this on either an X6 or X5. I am doubtful we will get any other X6 DIYers chiming in. Probably with these vehicles is that there are so few out there unlike the 3 series or 5 series!
|
Agree , found lots of dyi and videos for 3 and 5 but nothing for X6 .
So far after my research (reading and watching videos and going out and looking at my car) the biggest issue in access through firewall and how to get access to wires from inside passenger foot well.
I will take pics as I go along but this will take me a while, most likely several phases. I was hoping to get some time saving (as well as bending saving) tips here. I hope someone can answer some of the questions.