Quote:
Originally Posted by BMW-SRT
good idea, details on size and length?
|
I used half inch hydraulic hose (probably about 2' per side?) and two half inch unions (
https://www.usplastic.com/catalog/it...4325&catid=551). Cut each end of the stock hose about 2" from the end, then use the unions and a heat gun to join the hydraulic hose to the stock ends. You could epoxy around the union on the stock side to make sure it won't leak, but I wasn't able to force any air through it without it. I used clamps on the hose, but they didn't really seem necessary.