Quote:
Originally Posted by larryv
No special tools, just replace brake sensor if needed. One on the left front caliper and one on the right rear caliper. Just Remove anti rattle clips and remove the two black plug covers behind the caliper and insert the No 7 hex socket. If removing the rotors, you will have 2 bolts holding on the caliper bracket and then there is 1 hex screw holding on the rotor. Hopefully it not rusted on. You know the rest, Very easy.
|
This is the one special tool you'll need depending on the brakes. My 50i M Sport does not use a 7mm hex bolt, as most/all other BMWs seem to. It's 10mm, and that size is nearly impossible to find.
I have a thread on here about painting my calipers which I did this Spring, I go into more details there.
Otherwise, yup, super easy.