Quote:
Originally Posted by hellomyBMW
Last week, I managed to code my 2012 X6 through a wonderful help by jc_bmw. We coded auto fold mirrors, windows close with fob. Unfortunately, we were unable to code auto close of rear hatch with fob or button inside.
But that is not the main issue. The main issue is that after we have successfully coded, 4x4 fault code (005F3A) came up. And on the NAV screen, it says "Chasis stabilization reduced"
We tried clearing the code but it will not go away. I thought if I restart the vehicle, it may go away but no luck... It's been about a week now and the error code is still there... The car still drives fine except if I push hard on the vehicle, the car goes in a limp mode "power reduced mode"
Has this happened to any of you before? If so, what was your solution?
Please let me know!
Thank you!
|
Could just be a coincidence. Coding mirrors and windows should not be related in any way to 4x4 fault. Try disconnecting your battery for 15-20 min and re-connecting it back. Then drive your X6 for several miles. If that does not clear 4x4 fault, take it in for repair.