Quote:
Originally Posted by 1jwhite
Yes it is about 1700 psi. I have an autel maxi sys but not seeing anything about resetting adaptations. Might need itsa for that? It was running before rebuild... so frustrating. Could i possibly have the crank 360 degrees out when i set the cams?
|
When you put timing tool on crankshaft pulley, was it in correct position ? There is a mark on the pulley.
Was the pulley correctly placed on crankshaft ? Was flywheel placed correctly ? Most engines have some pin or something to prevent incorrect position during instalation.
Are you sure camshafts are in correct position ? I'm not 100 % sure, but it may be possible to put them on 180 degrees out because of the way the timing tools are made. In instructions there's pictures of cam lobes positions in correct timing.