Quote:
Originally Posted by Kakalika
I did some coding with Okee, but it still did not work.
|
Hey Kaklika, did Okee try changing VO values? I have no access to coding presently....I found this while browsing the e90 forums:
paddle type in EGS
wert_00 means switch based with steptronic from what I have gathered this is for pre facelift
wert_01 means resistance based without steptronic this must be for standard auto no step
wert_02 means resistance based with steptronic and this is setting for LCI cars
if fitting wheel to pre face lift add $2XA to the VO and wert_00.
if fitting LCI wheel to LCI car add $7XA and set EGS to wert_02