[m5james]

Originally Posted by Sophisticated Redneck

2 x DEI 1" wrap (for manifolds): https://www.amazon.com/gp/product/B002R4XL2Q

2 x DEI 2" wrap (for downpipes/cats): https://www.amazon.com/gp/product/B002R4U72I

1 X Stainless steel ties: https://www.amazon.com/SunplusTrade-.../dp/B072WC1MXT

1 x Locking tie tool: https://www.amazon.com/Design-Engine.../dp/*****U1UOI

1 x Heat Shielding for engine valley and turbo shield:https://www.amazon.com/gp/product/B00YJERW40

Are the lengths/quantities correct via the links?

- 2 rolls of 1"x50' header wrap...seems like a lot but then again I'll be wrapping S63TU manifolds
- 2 rolls of 2"x50' DP wrap...I've already wrapped mine but wasn't sure if it was used elsewhere while you're at it
- 100 SS exhaust cable ties...I used safety wire from work but this would probably work better
- your locking tool link is broken but I found "Design Engineering 010220 Locking Tie Tool"
- 1 sheet measuring 42" x 24" or 7 sq ft...you just lay this in the valley pan before putting the turbos back in?