View Single Post
      05-18-2018, 11:19 AM   #5
birdcatcher
Private First Class
United_States
12
Rep
106
Posts

Drives: '13 X5 35ixDrive E70
Join Date: Jul 2014
Location: NVA

iTrader: (0)

I have a 2013 E70 35i and went through the same last month. The water pump failed at ~40k miles!

Did some research on DIY and then decided it was not worth it! Got it done from a pro.

Some info from my research -
1. It will go in the same way (from the bottom). No need to remove fan.
2. If you remove the sway bar (only 2 or 4 bolts), it will make things a lot easier.
3. Turn the steering/ wheels towards Left when installing water pump.

I will try to find the DIY videos if possible.

Also, it is better to replace thermostat and coolant at the same time.
Replace water pump bolts with new ones (they are one time use only). All bolts need to be tightened (torq) as per spec. Make sure you do not over tighten.

I replaced everything with OEM BMW parts. Didn’t wanna go through this again for a thermostat or anything else related/ in the same area!
Appreciate 0