Quote:
Originally Posted by OllieX5M
I confirmed with the mechanic he didnt touch the coolant to do this repair. My main concern is i dont see the coolant running after turning the car off to cool the turbos. Im going to do a bleed procedure to see if i even see anythign moving in the coolant tank... I'm also thinking it could be a DME issue with the bit serial data code im getting
|
Pop the two torx screws at the top with engine running and warm to bleed (do not remove, just turn to open). FYI, air in the system will burn out that pump very quickly. I went through 3 of them before I properly bled the system.