View Single Post
      05-15-2012, 09:56 PM   #5
M3LLO
Private First Class
M3LLO's Avatar
United_States
22
Rep
112
Posts

Drives: 2012 F10 550I xDrive
Join Date: Aug 2010
Location: Phoenix, AZ

iTrader: (1)

The rear is a little more challenging because you have to remove the original bumper trim panel

to remove the original trip panel unscrew the two screws that hold it in and remove the blind rivets with a plier or a pair of scissors. You have to kind of get under the rivet head and cut it and then push the remaining part up and out.

Once the you have removed everything that attaches it, begin to pull the trip off of the bumper.There are several bumper tabs that you have to pull out. Use a little elbow grease and don't be afraid you have to give them a good pull to get them out.

Before you pull it off make sure to disconnect the park distance control if you have it equipped. The last pic shows the replacement of the PDC before you replace the new bumper trim panel.
Attached Images
     
__________________
2012 F10 550i XDrive Carbon Black Metallic
2011 E70 X5 50i Black Sapphire Metallic
2008 E92 M3 Jerez Black Metallic
Appreciate 0