Some of you may be getting the clear reflectors for you X6///M so I thought i'd do a quick DIY.
First, you need to find some kind of tool small enough to fit in this crack. I used a small flat head screwdriver. Be careful not to damage your paint.
If you shine a flash light into the crack you can kind of see some of the metal clip on the backside of the reflector. This clip is holding it in.
Careful not to damage your paint, wiggle your tool around until you can hook onto the clip and push it in the direction of the red arrow shown in the picture. Push the clip in and pull out the reflector and replace with new refelctor. Done!
