|
I don't have any other pictures that I didn't post, and apologies as I did this quite a while ago so my memory is a bit fuzzy. One thing I do remember is that the flares are snapped in to the bumper (you can see the tabs in the pics I posted of the flare), and you'll need to remove the bottom 2 screws for each flare on each side of the car. There are also other rivet-like fasteners above the 2 screws that hold the flares to the bunper and then the quarter panel. I was able to unsnap the flare without having to remove the rivets, however if you remove the rivets I believe you'll need to replace those as they are not re-usable.
Sorry, I know that's much help.
__________________
17' X5M LBB
91' 325ic - Bril Red, Full Dinan Spec
(past) 14' X5 50i MSport - Min White
(past) 11' X5 35i SA - Black Saph
(past) 07' X3 3.0si MSport
|