Quote:
|
Originally Posted by tommyboyLondon
And I did it without removing the bumper.
The only thing I did was unscrewing the screws at the bottom so that
I could pull the bumper slightly away and push the grille inside.
Once you unsnap all the hooks slightly bend it and pull it out through the grille hole.
Do the reverse with the new one, snap it in and screw the bumper back on.
|
Thanks for the tip on being able to do this without removing the bumper. I did it today in about 30 min.
It does take some patience and quite a bit of hand strength, but it worked it way out.