[QUOTE=Headgrunt;11308989]
Quote:
Originally Posted by Cal@Sonic MS
Evolve-R - Installation Overview
1. Install the supplied software on your laptop (Windows XP/Vista/7 )
2. Connect the cable to your OBD-II port and read your ECU into a file.
3. Email Evolve the file
4. Evolve tunes the file, emails it back and you use the evolve-R to flash the tuned file into your ECU.
You can replace your original/tune file at will, and of course if you add any additional modifications in the future, you use the same process to load up the new file Evolve would send you.
Additional Benefits:
- Free valet map (3k RPM limit) with every purchase
- Safe, reliable, tested extensively
- Code Clearing & Data Logging (coming soon!) with free upgrades.
Nice to see a Mac being used....VMWare or Parallels ??
How does the "Valet Map" work. Is there a trigger combination or do you have to totally recode the ECU?
|
VMware. But we still highly recommend using a dedicated PC for flashing just to be safe.
Unfortunately the valet map cannot be switched on the fly and requires a reflash - which normally takes 5-10 minutes.