Thread: H&R Springs
View Single Post
      05-25-2015, 08:29 AM   #6
JeST
Second Lieutenant
61
Rep
273
Posts

Drives: X5M
Join Date: Jul 2013
Location: NYC

iTrader: (2)

Quote:
Originally Posted by hatmandew View Post
Hey group, figured I would ask the experts (you) about the height concern I have. I just had the H&R 1.2 springs installed on my 2011 X5M. I had a specialist do it at the BMW dealer. The rear is air suspension. It looks great but the back end is sitting a little lower than the front. Not exact measurements but from the ground up the back is about 1/8th inch lower. Is it because the front springs have not settled completely yet? Should I raise the back end a little? If I measure from the center wheel up then the back is about 3/4 inches lower. I tried to add a pic to show you but was unsuccessful. Thanks for your help guys.
The rear should definitely be a little higher than the front. Adjusting the rear is pretty easy since its only a link. The longer the link the more the rear will be raised and vice versa. A full turn of the link = 1/4" raise. Ride quality will suffer if the car doesn't have enough rake.

Quote:
Originally Posted by JupiterBMW View Post
For the love of God, please post pics. I'm so undecided on the 1.2" kit or the 2" kit. Thanks.
2" kit gives the car a nice height/stance but ride quality will suffer. The stock shocks are not valved for the car to go that low. I know... i'm running the 2" H&R springs.

Appreciate 0