Ok here we go....
I will add more details to this through out the day but here is a quick tool and parts list of what I purchased.
I did not get everything done I want. I tried to make notes on each one of these items except a few gaskets. not much to say about them...
I might try t o get the rear breaks, transmission and power steering done this next weekend. here is the break down.
TOOLS
LOCKING SOCKETS TO KEEP FROM LOOSING NUTS IN HARD TO REACH PLACES
https://palmac.net/koken-nut-gripper...er-socket-set/ $73.57 USD
not just for this job but I used it. worked awesome
FOR TRANSMISSION PLUG AND OTHER TIGHT SPACE WORK
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $33.60
not only for this job, haven't used yet.
TO COVER INJECTORS AND FUEL RAILS AFTER TAKING OFF HIGH PRESSURE LINES
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $9.99
worked perfectly
1 OF 2 E SOCKET SETS
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $9.99
just wanted some extra e sockets for this job. both sets performed great.
2 OF 2 E SOCKET SETShttps://www.amazon.com/gp/product/B07JFJD53J/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 $9.97
just wanted some extra e sockets for this job
ELECTRIC RATCHET JUST BECAUSE I WANTED IT
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $59.49
I used it a lot and it worked great. I was impressed for the price.
E10 WITH BUILT ON SWIVEL FOR THE ONE BOLT UNDER THE INTAKE
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $22.14
not sure if I could have done it without this tool unless i fully removed the intake.
SPARK PLUG SOCKET
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $15.12
worked flawlessly.
SPARK PLUG GAP TOOLS
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $9.99
didn't end up needing to use.
SPRAK PLUG GAP GAUGE TOOL
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $5.99
worked fine
MINI SOCKET SET FOR TIGHT SPACES
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $82.64
Mostly got this for the 3 bolts in the transmission that are hard to get to due to space. Also purchased as my glove box tool kit to keep in the car. otherwise I would have gotten one cheaper.
WHEEL ALIGNMENT PIN
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $9.99
I wanted one of these for future jobs and this one.
OIL FILTER SOCKET
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $12.99
I needed one of these not really just for this job.
HIGH PRESSURE FUEL LINE SOCKETS
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $22.99
I didn't use the fuel line sockets. turns out mine were a standard 14mm hex
TOOL COST $378.46
CAR PARTS
CRANK VENT HOSE
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 $15.99
I some how lost this and have to find it. my old one of course broke and I had to patch it with a heater hose for a temporary fix
7 OF THESE
https://www.fcpeuro.com/products/top...i-moly-lm20032 $54.53
I did not do the transmission change yet. maybe next weekend.
1 OF THESE
https://www.fcpeuro.com/products/bmw...-24118612901kt $197.72
I did not do the transmission change yet. maybe next weekend.
1 OF THESE
https://www.fcpeuro.com/products/bmw...-crank-guard-1 $78.99
easy to install seems nice
1 OF THESE
https://www.fcpeuro.com/products/bmw...es-vtt-s55-cbc $104.99
easy to install seems nice
1 OF THESE
https://www.fcpeuro.com/products/bmw...30-83300496065 $24.49
waste of money. I used it a few times, and found the plugs stayed on the spark plug socket just as good.
6 OF THESE
https://www.fcpeuro.com/products/bmw...ch-12120037580 $59.34
1 had a gap out of tolerance no other issues yet. the old plugs looked great though and did not really need to be changed.
1 OF THESE
https://www.fcpeuro.com/products/bmw...ze-82141467704 $21.95
overpriced but knew that already
1 OF THESE
https://www.fcpeuro.com/products/bmw...0i-11287628659 $25.29
put on a new belt but the other one must have been replaced with the water pump 4k miles or so ago. oh well.
1 OF THESE
https://www.fcpeuro.com/products/bmw...e-rein-chc0609 $18.69
as expected the old plastic one crumbled up and fell apart when taking it off.
1 OF THESE
https://www.fcpeuro.com/products/bmw...ng-11377502022 $5.99
1 OF THESE
https://www.fcpeuro.com/products/bmw...5i-11127587804 $42.69
I bought this before deciding on replace the whole valve cover. I will send this back.
1 OF THESE
https://www.fcpeuro.com/products/bmw...et-11427537293 $31.79
1 OF THESE
https://www.fcpeuro.com/products/bmw...al-11427525335 $31.79
1 OF THESE
https://www.fcpeuro.com/products/bmw...er-11127570292 $442.99
this came with all of the bolts and gaskets. i decided to just replace the whole thing and not just the gasket.
1 OF THESE
https://www.fcpeuro.com/products/bmw...et-11137600482 $47.69
not even sure the oil pan gasket is leaking now. I did not use and will probably send back.
1 OF THESE
https://www.fcpeuro.com/products/bmw...-11132210959-1 $26.89
not even sure the oil pan gasket is leaking now. I did not use and will probably send back.
1 OF THESE
https://www.fcpeuro.com/products/bmw...4216793247ktr3 $215.85
ran out of time and will be pushed to when I do the transmission. probably this next weekend
1 OF THESE
1 × Burger Tuning (BMS) E Series N55 JB4 (Stage2)
Free Express Shipping:
Yes!
Please Select TMAP Type::
135/335/X1/X5/X6 some 2011, most 2012, all 2013+ Harness Type B
Add Bluetooth Connect Kit:
Yes
BMS USB Cable:
No
FlexFuel Wires:
Already Included
$618.00
expensive, but I defiantly can tell a big difference when stepping on it.
1 OF THESE
1 × MAD N55 Charge Pipe BMW F1x 535 640 X5 X6
O-ring:
Yes 13717568031
$116.30
great price and fits great no issues with it.
PARTS COST $2181.96
TOTAL SPENT
$2560.42